Sistem dan modul PLC menghadirkan otomatisasi fleksibel untuk berbagai industri di seluruh dunia. Inventaris kami mencakup pengontrol, modul input/output, dan unit komunikasi dari Allen-Bradley, Siemens, GE, dan merek terkemuka lainnya.
2 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
The ABB AI835A (3BSE051306R1) is a high-performance analog input module belonging to the S800 I/O distributed control family. Engineered for precision, it features eight differential input channels designed to process millivolt signals or a wide variety of thermocouple types. This module is essential for applications requiring high-accuracy temperature monitoring within the ABB Ability System 800xA environment.Features
Eight isolated differential input channels.
Supports linear millivolt measurements (-30 mV to +75 mV).
Compatible with a broad range of thermocouple types: B, C, D, E, J, K, L, N, R, S, T, and U.
Channel 8 configurable as a Cold Junction (CJ) reference channel using a Pt100 RTD.
15-bit A/D resolution for high-precision signal conversion.
Integrated wire-break and open-circuit monitoring for improved diagnostic reliability.
Applications
Power Generation: Monitoring turbine exhaust and boiler temperatures.
Chemical Processing: Tracking reactor and fluid line thermal profiles.
Oil & Gas: Precision data acquisition for remote extraction and refining processes.
Manufacturing & Metallurgy: Managing furnace, casting, and curing temperatures.
Water Treatment: Climate and liquid temperature tracking.
Technical Specifications
Model
AI835A (3BSE051306R1)
Number of Channels
8
Resolution
15 bits
Input Impedance
> 1 MΩ
Common Mode Rejection (CMRR)
120 dB (50/60 Hz)
Normal Mode Rejection (NMRR)
> 60 dB (50/60 Hz)
Power Dissipation
1.6 W
Current Consumption (+5V)
75 mA
Current Consumption (+24V)
50 mA
Max Field Cable Length
600 meters
Rated Insulation Voltage
50 V
Installation Guidelines
Ensure the system power is disconnected before installing or removing the module from the Modulebus.
The module must be mounted on a compatible S800 I/O MTU (Module Termination Unit).
Maintain proper grounding practices to ensure signal integrity and reduce electromagnetic interference.
Use shielded twisted-pair cabling for field sensors to minimize noise, keeping cable runs under 600 meters.
When using Channel 8 for Cold Junction compensation, ensure the Pt100 RTD is correctly wired to the MTU terminals.
Handle modules in accordance with standard ESD (Electrostatic Discharge) protection protocols.
FAQsWhat is the primary function of the AI835A?The AI835A is an analog input module used in S800 I/O systems to convert thermocouple or millivolt signals into digital data for process control.Can I use Channel 8 for standard inputs?Yes, if you do not require internal Cold Junction compensation, Channel 8 can be configured as a standard input channel, provided a fixed junction temperature is defined in the application parameters.Is this module compatible with HART?No, the AI835A does not support HART communication or Sequence of Events (SOE) time-tagging.
2 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
5 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
Product OverviewThe Siemens 6ES5735-1BD20 is a specialized communication cable engineered for the Simatic S5 automation environment. This 3.2-meter assembly is designed to facilitate reliable data transfer between legacy peripheral hardware, specifically connecting PT 8.x and DR 2.x series industrial printers to PG/OP 396 programming and operator interfaces. By providing a stable physical connection, this cable ensures that critical operational logs, fault records, and diagnostic data are accurately captured and printed, supporting essential compliance and maintenance workflows in legacy control systems.Technical Features
Interface Technology: Utilizes a 20 mA current loop interface, which is inherently resistant to electromagnetic interference (EMI) and ground potential shifts common in industrial environments.
Signal Integrity: Features high-quality internal copper conductors protected by a dual-layer shielding system (aluminum-mylar foil and tinned copper braid) to minimize signal attenuation and noise.
Industrial Durability: Equipped with robust sub-D connectors designed for secure, gas-tight mechanical coupling, ensuring reliable operation despite continuous vibration on the factory floor.
Optimized Length: The 3.2-meter length provides sufficient reach for routing within control cabinets while maintaining signal quality for serial data transmission.
ApplicationsThis cable is primarily deployed in legacy Simatic S5 installations where hardcopy documentation of system events is required. Typical applications include chemical processing plants, power generation facilities, and pulp and paper manufacturing, where it connects printers to control terminals for sequence-of-events recording and diagnostic logging.Technical Specifications
Model
6ES5735-1BD20
Brand
Siemens Simatic S5
Cable Length
3.2 meters
Interface Protocol
20 mA Current Loop
Compatible Hardware
PT 8.x / DR 2.x Printers; PG/OP 396 Interfaces
Operating Temperature
0 to 60 deg C
Weight
0.18 kg
Installation Guidelines
Pre-installation: Ensure the power to both the printer and the PG/OP interface is disconnected before attempting to connect the cable to prevent potential current loop surges.
Routing: Route the cable away from high-voltage power lines and large motor contactors to maintain the integrity of the 20 mA signal.
Connection: Ensure that the sub-D connectors are fully seated and the locking screws are tightened to provide a secure, vibration-resistant connection.
Handling: Avoid sharp bends or kinks in the cable jacket, as this can damage the internal shielding and degrade long-term performance.
5 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
2 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
DescriptionThe Schneider Electric ASS908022 is a dedicated S908 Remote I/O Processor module designed for integration within Modicon 984 and Quantum PLC backplane environments. This module serves as a critical communication interface, managing deterministic data exchange between the central processor and distributed I/O drops. It is specifically engineered to maintain high-speed, reliable communication in demanding industrial sectors, including power generation, mining, and petrochemical processing, where signal integrity and network uptime are essential.Features
Supports deterministic token-passing communication protocols for real-time I/O scanning.
Enables redundant network architecture with automatic switchover between dual coaxial channels (Channel A/B) in the event of a fault.
Provides galvanic isolation to shield sensitive backplane logic from electromagnetic interference and transient surges.
Integrates directly into existing Modicon 984 and Quantum rack structures.
Facilitates advanced diagnostics for line fault tracking and communication drop isolation.
ApplicationsThis module is typically utilized in large-scale distributed control systems where remote I/O stations are spread across wide geographical areas. It is suitable for continuous process control applications that require redundant communication paths to prevent system downtime during cable failures or signal degradation.Technical Specifications
Model
ASS908022 (S908 022)
Brand
Schneider Electric
Network Interface
Dual BNC (Channel A and Channel B)
Transmission Rate
1.544 Mbps
Media Type
75 Ohm RG-6 / RG-11 Coaxial
Max Drop Capacity
32 Remote Stations
Max Network Distance
4500 m (with repeaters) / 1500 m (point-to-point)
Power Consumption
850 mA at 5 VDC (backplane powered)
Operating Temperature
0 to 60 deg C
Storage Temperature
-40 to 85 deg C
Installation Guidelines
Ensure the PLC chassis is powered down before inserting or removing the module to prevent electrical damage.
Verify that the backplane slot is clean and free of debris before seating the module.
Use high-quality 75 Ohm coaxial cable and proper BNC termination to maintain signal integrity over long distances.
Maintain proper grounding of the coaxial shield at designated points to minimize EMI/RFI impact.
Ensure adequate ventilation around the rack to maintain operating temperatures within the specified 0-60 deg C range.
FAQWhat is the primary function of the ASS908022 module?It acts as a communication processor that manages the S908 remote I/O network, mapping remote I/O registers directly into the main controller's memory for deterministic data handling.Does this module support redundant communication?Yes, it supports a dual-channel coaxial configuration, allowing the system to automatically switch between Channel A and Channel B within a single network scan cycle if a fault is detected.Can this module be used with Quantum series controllers?Yes, the ASS908022 is compatible with both Modicon 984 and Quantum backplane architectures.
2 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
5 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
DescriptionThe Schneider Electric TSXP57554M is a high-performance, double-format central processing unit designed for the Modicon Premium automation platform. This processor is engineered to manage demanding industrial control tasks, providing robust computational capabilities for large-scale applications such as power generation, petrochemical processing, and heavy mining infrastructure. By integrating advanced memory management and high-speed background synchronization, the TSXP57554M ensures minimal cycle latency and enhanced stability for complex control loops.Features
Dual-slot form factor designed for seamless integration into TSX RKY series backplanes.
Integrated 10/100 Mbps Ethernet TCP/IP port for deterministic industrial networking.
Dedicated multi-protocol serial terminal port supporting Uni-Telway and Modbus communication.
Two PCMCIA slots for flexible memory expansion or additional co-processor modules.
High-density I/O support, capable of managing up to 2048 discrete and 512 analog channels.
Optimized for low-jitter boolean execution to ensure precise control timing.
Technical Specifications
Model
TSXP57554M
Brand
Schneider Electric
Internal RAM
1024K Words
Power Consumption
1650 mA at 5 VDC
Operating Temperature
0 to 60 deg C
Storage Temperature
-25 to 70 deg C
Humidity
10 to 95% non-condensing
Installation Guidelines
Ensure the rack is powered down before inserting or removing the CPU module to prevent electrical damage.
Align the module carefully with the TSX RKY backplane guide rails to avoid bending pins.
Secure the module using the integrated locking mechanisms to ensure a reliable connection to the backplane bus.
Maintain adequate clearance around the module to allow for proper thermal dissipation during operation.
Use shielded communication cables for Ethernet and serial ports to minimize EMI interference in noisy industrial environments.
Handle with standard ESD precautions to protect internal circuitry from static discharge.
FAQWhat is the primary function of the PCMCIA slots on this CPU? The two PCMCIA slots are designed for memory expansion using flash memory cards or for adding auxiliary network communication interfaces like Fipio or Modbus Plus.Is this CPU suitable for high-speed I/O applications? Yes, the TSXP57554M is optimized for high-density I/O structures and provides fast synchronous cycles, making it suitable for time-critical control logic.
5 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
3 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
DescriptionThe GE Fanuc IC697VAL318 is a high-performance, isolated analog output module engineered for the Series 90-70 PLC platform. This module is designed to bridge digital control logic and physical field devices by providing eight independent current loop output channels. It is widely utilized in demanding industrial applications, including power generation, chemical processing, and water management, where precise control of actuators, valves, and drives is essential for process stability.Features
Eight Independent Channels: Provides eight isolated 4 to 20 mA output signals for multi-loop control applications.
Galvanic Isolation: Includes robust isolation between channels and the PLC backplane to mitigate ground loops and protect against electrical noise or surges.
High-Resolution Output: Features 12-bit resolution to ensure fine-grained control and accuracy for critical process instrumentation.
Field-Replaceable Design: Equipped with a removable terminal block to allow for simplified maintenance and faster field wiring replacement without disturbing existing cable runs.
ApplicationsThis module is specifically suited for controlling industrial equipment that requires reliable 4 to 20 mA current signals. Common use cases include the positioning of pneumatic valves, the regulation of variable frequency drives (VFDs), and the sending of setpoints to remote process controllers in large-scale automation architectures.Technical Specifications
Model
IC697VAL318
Series
Series 90-70
Channel Count
8
Output Range
4 to 20 mA
Resolution
12-bit
Isolation
Yes (Galvanically Isolated)
Operating Temperature
0 to 60 degC
Termination
Removable Terminal Block
Installation Guidelines
Power Status: Always disconnect power from the PLC rack before inserting or removing the module to prevent electrical damage.
ESD Handling: Use a grounded wrist strap when handling the module to prevent electrostatic discharge damage to sensitive internal components.
Wiring: Ensure that shielded cabling is used for current loop outputs to minimize EMI interference in high-noise environments.
Slot Alignment: Verify that the module is correctly aligned with the backplane connector before applying pressure to seat the unit into the Series 90-70 rack.
Cooling: Maintain adequate clearance around the module to ensure proper airflow and heat dissipation within the cabinet.
FAQIs the IC697VAL318 compatible with all Series 90-70 racks?Yes, this module is designed for standard Series 90-70 PLC backplanes. Ensure your rack has the appropriate slot configuration for an analog output module.Does this module require external power for the current loops?The module is designed to operate within the 4 to 20 mA standard; please refer to your specific loop power requirements for the field devices being controlled.Can I replace the terminal block without rewiring the entire system?Yes, the IC697VAL318 features a removable terminal block, which allows you to disconnect the wiring interface from the module without needing to remove individual wires from the terminals.
3 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
9 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
DescriptionThe Allen-Bradley 1756-EN2T is a high-performance EtherNet/IP communication bridge module designed for the ControlLogix platform. This module enables seamless connectivity between ControlLogix controllers, distributed I/O, HMI systems, SCADA networks, and other EtherNet/IP-enabled industrial hardware. By acting as a bridge between the ControlLogix backplane and standard industrial Ethernet networks, it facilitates real-time I/O messaging, controller-to-controller data exchange, and supervisory control functions.Features
Supports 10/100 Mbps communication rates over standard twisted-pair copper media.
Provides 256 Logix (CIP) communication connections and 128 TCP/IP connections.
Supports up to 8 axes of integrated motion control on the EtherNet/IP network.
Features electronic keying, device-level ring (DLR) support, and parallel redundancy protocol (PRP) capabilities.
Enables CIP safety standard integration for simultaneous transfer of control and safety diagnostics.
Designed for installation in any available slot within a ControlLogix chassis.
Technical Specifications
Model
1756-EN2T
Communication Rate
10/100 Mbps
Integrated Ports
1 x RJ45, 1 x USB 1.1
Current Draw
1.0 A at 5.1 V DC
Power Dissipation
5.1 W
Thermal Dissipation
17.4 BTU/hour
Operating Temperature
0 to 60 degC (32 to 140 degF)
Insulation Voltage
30 V Continuous
Applications
High-speed packaging and assembly line automation.
Batch and recipe management via FactoryTalk integration.
Remote I/O and distributed process rack communication.
Integration of flow meters and custody transfer instrumentation.
Pipeline emergency shutdown (ESD) systems requiring SIL2 diagnostic data transfer.
Installation Guidelines
Chassis Mounting: Align the module circuit board with the top and bottom guide rails of the designated ControlLogix chassis slot. Slide the module in until it is fully seated and the retaining tabs click into place.
Wiring: Use standard Category 5 unshielded twisted-pair (UTP) cabling for the RJ45 Ethernet interface. Ensure proper strain relief for all network cables.
RIUP Support: The 1756-EN2T supports Removal and Insertion Under Power (RIUP), allowing for maintenance without cycling chassis power.
Configuration: Network parameters, including IP address, subnet mask, and gateway settings, must be configured via the programming environment to enable network communication.
FAQWhat is the primary function of the 1756-EN2T?The 1756-EN2T serves as a communication bridge that allows ControlLogix controllers to communicate with other devices and systems over an EtherNet/IP network, supporting both explicit and implicit messaging.Can this module be used for motion control?Yes, this module supports up to 8 axes of integrated motion control on an EtherNet/IP network.Does this module require a specific chassis slot?No, the 1756-EN2T can be installed in any slot within a standard ControlLogix chassis.
9 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
8 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
Description
The 110CPU51203 is a robust central processing unit engineered for the Schneider Electric Modicon Micro PLC series. This compact controller serves as the primary logic engine for small-to-mid-scale automation tasks, combining processing capabilities with integrated discrete I/O and serial communication ports. Designed for reliability in demanding industrial environments, this unit ensures consistent scan times and deterministic control for localized machine automation, relay logic, and basic process sequencing.
Features
Integrated discrete I/O: 16 inputs and 12 outputs for direct field device connectivity.
Communication support: Native serial interfaces compatible with Modbus RTU, ASCII, and Uni-Telway protocols.
Memory retention: Equipped with internal battery-backed static RAM to maintain user programs during power cycles.
Diagnostic status: Front-mounted LED indicators provide real-time monitoring of processor health, communication status, and operational mode.
Compact design: Self-contained architecture built to withstand high-vibration and harsh industrial conditions.
Applications
This processor module is widely deployed in various industrial sectors, including automated material distribution, petroleum processing, mineral extraction, and thermal power generation. It is ideal for managing sub-system timing, basic analog sequencing, and localized machine control where space-saving and reliable logic execution are required.
Technical Specifications
Model
110CPU51203
Brand
Schneider Electric
Series
Modicon Micro
Memory
12 kBytes RAM
Integrated I/O
16 Inputs / 12 Outputs (Discrete)
Communication
RS232 / RS485 (Modbus)
Power Requirements
24 VDC, 0.85 A
Operating Temperature
0 to 60 deg C
Storage Temperature
-40 to 85 deg C
Installation Guidelines
Ensure the controller is mounted in a location with adequate ventilation to maintain operating temperatures within the 0-60 deg C range.
Power down the system completely before inserting or removing the module from the rack to prevent electrical damage.
Use shielded communication cables for RS232/RS485 connections to minimize EMI interference in noisy industrial environments.
Verify that the internal battery is functional to prevent the loss of program memory during power outages.
Follow standard ESD precautions when handling the module to protect sensitive internal circuitry.
FAQ
Does this module support Modbus communication? Yes, the 110CPU51203 includes integrated serial ports supporting Modbus RTU and ASCII protocols.
What is the primary function of the front-mounted LEDs? The LEDs provide immediate visual feedback regarding the PLC's operational state, including CPU run status, network activity, and active diagnostic fault conditions.
Is the memory volatile? The unit uses static RAM supported by an internal battery backup, ensuring that your logic programs are preserved when the primary power supply is disconnected.
8 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
3 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
DescriptionThe Allen-Bradley 1756-IT6I is a high-performance analog thermocouple input module designed for the ControlLogix platform. This module provides six isolated input channels, specifically engineered to interface with a wide range of thermocouple types for precise temperature monitoring in industrial control environments. By offering isolation between channels, the module effectively minimizes signal interference, ensuring reliable data acquisition even in electrically noisy settings.Features
Six isolated thermocouple input channels for enhanced signal integrity.
Supports a comprehensive range of thermocouple types including B, C, E, J, K, N, R, S, and T.
Includes one Cold Junction Compensation (CJC) input for accurate temperature readings.
Compatible with 1756-TBNH and 1756-TBSH removable terminal blocks for flexible wiring configurations.
Optimized power dissipation with a maximum rating of 4.3 Watts.
Technical Specifications
Module Type
Isolated Thermocouple Input Module
Input Points
6 Isolated Channels
Supported Sensors
B, C, E, J, K, N, R, S, T
Backplane Current (5V)
250 mA
Backplane Current (24V)
2 mA
Max Power Dissipation
4.3 Watts
Compatible RTBs
1756-TBNH, 1756-TBSH
Installation Guidelines
Ensure the ControlLogix chassis is powered down before inserting or removing the 1756-IT6I module to prevent electrical damage.
Use properly shielded thermocouple extension wire to minimize electromagnetic interference (EMI).
Verify that the removable terminal block (RTB) is securely locked into the module housing before applying power.
Maintain adequate clearance around the chassis for proper airflow and cooling, as the module dissipates heat during operation.
Ground the shield of the thermocouple cables at the sensor end or the module end according to your specific facility grounding standards to prevent ground loops.
FAQWhat thermocouple types does the 1756-IT6I support?This module supports a broad range of standard thermocouple types, specifically B, C, E, J, K, N, R, S, and T.Is this module isolated?Yes, the 1756-IT6I features six isolated input channels, which helps protect against common-mode noise and ground loops in complex industrial systems.Which terminal blocks are compatible with this module?The module is designed to be used with 1756-TBNH or 1756-TBSH removable terminal blocks.
3 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
4 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
Product OverviewThe Schneider Electric TSXDSZ08R5 is a specialized relay output module designed for integration within the Modicon TSX Micro programmable logic controller architecture. This unit provides 8 discrete, normally open (NO) relay outputs, enabling the control of high-load field devices directly from the PLC backplane. It is engineered for industrial environments where galvanic isolation and the ability to switch varying voltage levels are critical for maintaining system integrity and protecting sensitive processor circuitry.Features
Eight independent, normally open (NO) mechanical relay outputs.
Galvanic isolation between the internal logic bus and field-side contacts for enhanced safety.
Integrated RC snubber circuits to suppress voltage spikes during reactive load switching.
LED status indicators for each channel to verify output state and facilitate rapid field diagnostics.
Designed for operation across a broad range of AC and DC voltage applications.
Removable screw terminal block for efficient wiring and maintenance.
ApplicationsThis module is suitable for various industrial automation tasks, including motor starter control, solenoid valve actuation, and interposing logic for high-voltage circuits. It is commonly deployed in sectors such as automated manufacturing, water treatment, and HVAC control systems where reliable, isolated discrete switching is required.Technical Specifications
Model
TSXDSZ08R5
Outputs
8 Normally Open (NO) Relay
Operating Voltage
24-240 VAC / 24-48 VDC
Max Current per Channel
2.0 A
Total Module Current Limit
10.0 A
Min Switching Current
1 mA at 5 VDC
Bus Power Consumption
45 mA at 5 VDC / 60 mA at 24 VDC
Insulation Voltage
2000 VAC (Contacts to Bus)
Operating Temperature
0 to 60 deg C
Storage Temperature
-25 to 70 deg C
Humidity
10 to 95% non-condensing
Installation Guidelines
Ensure the PLC rack is powered down before installing or removing the module to prevent electrical damage.
Mount the module securely into the designated TSX Micro rack slot, ensuring proper alignment with the backplane connector.
Use shielded cabling for field wiring to minimize electromagnetic interference (EMI) in high-noise industrial environments.
Verify that the total load current across all channels does not exceed the 10 A module limit.
Maintain proper ventilation within the control cabinet to keep ambient temperatures within the specified 0 to 60 deg C range.
Handle with standard ESD precautions to prevent damage to internal PCB components.
FAQIs the TSXDSZ08R5 compatible with all TSX Micro racks?Yes, this module is specifically designed for the Modicon TSX Micro series. Please ensure your specific base configuration supports the slot requirements for this module type.Does this module provide protection against inductive surges?Yes, the module includes an onboard RC snubber array to mitigate counter-electromotive force spikes caused by inductive loads like relay coils or solenoids.Can I replace the terminal block if it becomes damaged?The TSXDSZ08R5 utilizes a removable screw terminal block, which allows for field replacement or pre-wiring without disturbing the module's connection to the backplane.
4 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
10 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
DescriptionThe Schneider Electric TSXDEY16A2 is a 16-channel discrete input module designed for integration within the Modicon Premium automation system. This module is specifically engineered to interface with 24 V AC field devices, including limit switches, auxiliary contacts, and safety interlocks. By utilizing integrated filtering and optical isolation, the TSXDEY16A2 ensures robust signal integrity, effectively mitigating the effects of contact bounce and electrical noise commonly encountered in heavy industrial environments such as power generation and chemical processing.Features
16 independent input channels configured in a single isolated group.
Designed for 24 V AC nominal input voltage applications.
Integrated hardware filtering to suppress high-frequency noise and transients.
1500 V AC dielectric isolation barrier between field inputs and the internal backplane.
Compact module design utilizing a standard HE10 connector interface.
High noise immunity for reliable state monitoring in demanding electrical environments.
ApplicationsThis module is suitable for use in various industrial automation sectors where AC status sensing is required. Typical applications include monitoring field-mounted switches in mining crushers, utility process control, and large-scale manufacturing equipment where AC signaling is the standard for field device communication.Technical Specifications
Model
TSXDEY16A2
Brand
Schneider Electric
Input Channels
16 (1 isolated group)
Nominal Voltage
24 V AC
Voltage Range
19 to 30 V AC
Frequency Range
47 to 63 Hz
Input Impedance
1.8 kOhm
State 1 Threshold
>= 14 V AC / >= 5 mA
State 0 Threshold
<= 5 V AC / <= 2 mA
Response Time
15 ms
Current Consumption
50 mA at 5 V DC (backplane)
Operating Temperature
0 to 60 deg C
Storage Temperature
-25 to 70 deg C
Installation Guidelines
Ensure the rack power is disconnected before installing or removing the module to prevent damage to the backplane connectors.
Verify that the field wiring is correctly routed away from high-voltage power cables to minimize electromagnetic interference.
Ensure the module is fully seated in the rack slot and secured using the integrated locking mechanism.
Use shielded cables for field inputs where long cable runs are required to maintain signal integrity.
Observe proper environmental conditions, ensuring the cabinet is well-ventilated to maintain ambient temperatures within the 0 to 60 deg C range.
FAQWhat type of field devices can be connected to the TSXDEY16A2?This module is designed for 24 V AC devices such as mechanical switches, pushbuttons, and auxiliary contacts of contactors or relays.Does this module require external power for the inputs?The inputs are powered by the 24 V AC field supply. The module itself draws its internal logic power (50 mA) from the Modicon Premium rack backplane.What is the purpose of the 15 ms filtering delay?The 15 ms delay is a hardware-based debounce feature that prevents the module from registering false signals caused by mechanical contact bounce or brief electrical transients.
10 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
DescriptionThe Siemens 6ES5956-0AA12 is a dedicated power supply board engineered for the Simatic S5 automation series. This module provides essential 15 V DC power to the system backplane, ensuring that connected processing units and I/O modules receive stable, noise-free voltage for reliable operation. As a critical component for legacy control systems, this module is widely utilized in heavy industrial environments, including manufacturing plants and energy facilities, to maintain system uptime and prevent process interruptions caused by power instability.Features
Designed specifically for integration within the Simatic S5 chassis architecture.
Delivers a stabilized 15 V DC output to support backplane communication and logic processing.
Rugged circuit design utilizing high-quality industrial components to withstand electrical interference.
Passive thermal management through natural convection, reducing maintenance requirements by avoiding moving parts like cooling fans.
Compact PCB form factor for efficient installation in standard S5 subracks.
ApplicationsThis power supply module is intended for use in legacy Siemens Simatic S5 control systems. It is commonly found in automated production lines, power distribution management, and chemical processing automation where legacy hardware remains the backbone of the control strategy.Technical Specifications
Model
6ES5956-0AA12
Series
Simatic S5
Output Voltage
15 VDC
Cooling
Natural Convection
Operating Temperature
0 to 60 deg C
Installation Guidelines
Ensure the main power source is disconnected from the S5 rack before attempting to insert or remove the module.
Handle the PCB by the edges to prevent electrostatic discharge (ESD) damage to sensitive components.
Verify that the module is fully seated in the designated backplane slot to ensure proper contact with the power rails.
Ensure adequate clearance around the module to facilitate natural convection cooling and prevent localized overheating.
Confirm that the rack environment is free from excessive dust, moisture, and corrosive gases to maintain long-term reliability.
FAQIs this module compatible with all Simatic S5 systems?The 6ES5956-0AA12 is designed for specific S5 configurations. Always verify your existing part number and system manual to ensure compatibility with your particular rack and backplane setup.Does this module require external cooling fans?No, this unit is designed for passive cooling through natural convection. Ensure the cabinet ventilation is adequate to maintain the operating temperature within the specified 0 to 60 deg C range.
1 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
DescriptionThe Allen-Bradley 1756-IN16 is a high-performance digital AC input module designed for integration within the ControlLogix platform. This module provides 16 isolated input channels, specifically engineered to interface with 24V AC field devices. It is widely utilized in industrial automation environments to monitor status signals from sensors, switches, and relays, ensuring reliable data acquisition for the ControlLogix controller.Features
16-point digital AC input configuration.
Designed for 24V AC nominal input voltage operation.
Programmable input delay times (9 or 18 milliseconds) to filter out unwanted signal noise.
Compatible with standard ControlLogix chassis mounting for seamless system expansion.
Status indicators on the front panel for rapid diagnostic and channel-level monitoring.
Technical Specifications
Catalog Number
1756-IN16
Module Type
Digital AC Input Module
Number of Inputs
16
Nominal Input Voltage
24V AC
Operating Voltage Range
10-30V AC
Input Delay Time
Programmable (9 or 18 ms)
Min. Operating Current
5 mA at 10V AC, 60 Hz
Max. Off-State Current
2.75 mA
Manufacturer
Allen-Bradley
Installation Guidelines
Ensure the ControlLogix chassis power is removed before inserting or removing the 1756-IN16 module to prevent electrical damage.
Verify that the module is fully seated in the chassis slot and that the locking tab is engaged.
Adhere to proper grounding practices for the chassis and field wiring to minimize electromagnetic interference (EMI).
Use shielded cabling for input signals where necessary, especially in environments with high-frequency noise or long cable runs.
Maintain adequate ventilation within the control cabinet to keep the module within its specified operating temperature range.
FAQWhat is the primary function of the 1756-IN16?This module serves as a digital interface to detect 24V AC signals from external field devices and transmit that data to the ControlLogix processor.Can I adjust the input response time?Yes, the input delay time is software-programmable to either 9 or 18 milliseconds, allowing for flexibility in filtering noisy signals.Is this module compatible with other ControlLogix I/O?Yes, the 1756-IN16 is a standard ControlLogix module designed to fit into any 1756 series chassis.
1 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
Product OverviewThe TSXP5730 serves as a robust central processing unit within the Schneider Electric Modicon Premium automation platform. Designed for high-performance industrial control, this processor manages complex logic execution, register mapping, and high-speed cycle times required for demanding process control environments. It acts as the primary intelligence hub for distributed I/O architectures, ensuring stable performance in applications ranging from water treatment facilities to heavy industrial manufacturing and energy production.Features
Advanced microprocessor architecture for high-speed logic and floating-point operations.
Integrated memory management with support for PCMCIA expansion cards for extended data logging and program storage.
On-board diagnostic LEDs for real-time monitoring of processor status, memory health, and communication bus traffic.
Native support for industrial communication protocols, including Uni-Telway and Modbus, facilitating seamless integration with field devices.
Engineered for high-reliability operation in harsh industrial conditions with robust backplane mounting.
ApplicationsThe TSXP5730 is widely utilized in large-scale infrastructure and manufacturing sectors, including:
Thermal and hydroelectric power generation control.
Petroleum and chemical refinery process management.
Municipal water and wastewater treatment automation.
Continuous mining and material processing lines.
Technical Specifications
Model
TSXP5730
Brand
Schneider Electric
Series
Modicon Premium
Processor Type
PLC CPU
Memory Expansion
1 x PCMCIA Slot
Internal RAM
48 kWords
Communication Ports
Mini-DIN (Uni-Telway / Modbus)
Power Supply
5 VDC, 1.55 A (via backplane)
Operating Temperature
0 to 60 deg C
Storage Temperature
-25 to 70 deg C
Installation Guidelines
Ensure the PLC backplane is powered down before installing or removing the processor module to prevent electrical damage.
Slide the module carefully into the designated rack slot, ensuring the backplane connectors are fully seated and aligned.
Maintain proper ventilation in the control cabinet to ensure ambient temperatures remain within the 0 to 60 deg C operating range.
Use shielded communication cables for fieldbus connections to minimize EMI interference, ensuring the shield is properly bonded to the cabinet ground.
Perform a system check via the diagnostic LEDs after installation to verify successful initialization and communication status.
FAQIs this module compatible with existing Modicon Premium racks? Yes, the TSXP5730 is designed specifically for the Modicon Premium backplane architecture.Can I expand the memory capacity of this unit? Yes, the module features a dedicated PCMCIA slot on the front panel that supports memory expansion cards for increased data and program storage.What communication protocols are supported natively? The unit supports standard Uni-Telway and Modbus protocols via its integrated Mini-DIN interface.
8 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
Description
The Allen-Bradley 1756-DNB/E is a Series E DeviceNet scanner module designed for integration within the ControlLogix platform. This module serves as a robust communication bridge, facilitating high-speed data exchange between the ControlLogix controller and various field devices distributed across a DeviceNet network. By offloading network management tasks from the main processor, the 1756-DNB/E ensures efficient I/O throughput and reliable control in demanding industrial environments.
Features
Supports up to 64 nodes on a single DeviceNet network.
Series E hardware revision for improved processing and firmware stability.
Adaptive auto-baud detection for optimized communication across varying cable lengths.
Dedicated front-facing DeviceNet port for trunk-line or drop-line physical connections.
Integrated USB port for local diagnostics and network commissioning without interrupting backplane communication.
Occupies a single slot in any standard ControlLogix chassis.
Technical Specifications
Model
1756-DNB/E (Series E)
Brand
Allen-Bradley
Platform
ControlLogix
Max Nodes
64
Data Rates
125 Kbps (500m), 250 Kbps (250m), 500 Kbps (100m)
Backplane Current
400 mA @ 5.1 VDC
Power Dissipation
3.5 Watts (11.9 BTU/hr)
External Voltage
11 to 25 VDC
Installation Guidelines
Ensure the ControlLogix chassis is powered down before inserting or removing the module to prevent electrical damage.
Install the module into any available slot in the chassis; ensure it is fully seated and the top/bottom latches are secured.
Use shielded, twisted-pair cabling for DeviceNet connections to minimize EMI interference.
Follow standard grounding procedures for the DeviceNet network to ensure signal integrity.
Maintain proper ventilation in the control cabinet to keep ambient temperatures within operating limits.
FAQ
Is the USB port on the 1756-DNB/E intended for permanent network connection?No, the USB port is designed for local configuration, commissioning, and maintenance tasks. It functions independently of the backplane and is not intended for continuous network data transmission.
What is the maximum distance supported by this module?The maximum distance is dependent on the baud rate: 500m at 125 Kbps, 250m at 250 Kbps, and 100m at 500 Kbps.
8 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
7 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
Product DescriptionThe Schneider Electric 140DAI75300 is a dedicated discrete input module designed for the Modicon Quantum automation series. This module is engineered to reliably interface field-level discrete signals with the Quantum backplane, serving as a critical component in high-availability control systems. It provides robust signal acquisition for industrial applications requiring consistent monitoring of digital field devices.Features
Designed specifically for the Modicon Quantum platform architecture.
High-density input processing capability for complex control loops.
Engineered for integration into standard Quantum I/O racks.
Integrated status monitoring for simplified field diagnostics.
Designed to operate within established industrial environmental parameters.
ApplicationsThis module is suitable for a wide range of industrial automation environments, including:
Large-scale manufacturing process control.
Infrastructure and utility monitoring systems.
Automated assembly and material handling lines.
Distributed control architectures requiring high-reliability signal input.
Installation Guidelines
Ensure the Quantum rack power is completely disconnected before attempting to insert or remove the module.
Verify that the module is properly seated within the designated slot to ensure secure backplane connection.
Use appropriate shielded cabling for field inputs to minimize electromagnetic interference (EMI) in high-noise environments.
Adhere to standard ESD safety protocols when handling the module to prevent damage to sensitive internal circuitry.
Confirm that the rack environment meets the specified operating temperature range of 0 to 60 deg C.
FAQIs the 140DAI75300 compatible with other Modicon series?This module is specifically designed for the Modicon Quantum platform. It is not intended for use with Momentum or other Schneider product families.Does this module require external power?The module is powered via the Quantum backplane, but field-side input voltage requirements must be strictly observed as per the technical documentation provided with your specific system configuration.
7 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
9 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
Description
The Siemens 6ES5700-0LA11 is a robust 4-slot mounting rack engineered for the Simatic S5 PLC series. This subrack serves as the essential mechanical and electrical foundation for S5 systems, facilitating the integration of CPUs, power supplies, and various I/O or communication modules. It is specifically designed to provide a stable, vibration-resistant environment for critical control hardware, ensuring reliable communication across the system's backplane. This component is widely utilized in established industrial automation environments where long-term system stability and signal integrity are required.
Features
Modular Architecture: Provides 4 dedicated slots for flexible configuration of Simatic S5 components.
Signal Integrity: Passive backplane design minimizes impedance mismatches and cross-talk, supporting consistent data bus performance.
EMI Protection: Features an integrated grounding rail designed to mitigate high-frequency electromagnetic interference.
Industrial Durability: Constructed with an anodized aluminum profile for structural rigidity and protection against torsional stress.
Secure Mounting: Precision guide rails ensure modules are aligned correctly and locked securely to prevent intermittent connection failures.
Applications
This mounting rack is a standard choice for maintaining or upgrading legacy Simatic S5 automation systems. Typical applications include metal processing facilities, municipal water treatment and pumping stations, and petrochemical refining infrastructure where S5 controllers remain a core part of the process control loop.
Technical Specifications
Model
6ES5700-0LA11
Brand
Siemens
Series
Simatic S5
Slot Capacity
4 Slots
Power Consumption
0 W (Passive)
Operating Temperature
0 to 60 degC
Storage Temperature
-40 to 70 degC
Installation Guidelines
Ensure the rack is mounted to a clean, vibration-dampened surface within a standard industrial enclosure.
Always disconnect power to the system before inserting or removing modules from the rack to prevent electrical arcing or short-circuiting of the backplane pins.
Verify that all modules are fully seated and secured via the provided locking mechanisms to ensure optimal electrical contact.
Maintain proper grounding of the chassis to the main cabinet ground point to ensure effective EMI shielding.
Allow for adequate ventilation around the rack to prevent heat buildup, adhering to the specified operating temperature range.
FAQ
Q: Is this rack compatible with all Simatic S5 modules?A: This rack is designed for the standard Simatic S5 module form factor. Please verify your specific module series compatibility with the S5 backplane architecture before installation.
Q: Does this unit require external power?A: No, the 6ES5700-0LA11 is a passive backplane. It distributes power provided by the S5 power supply module inserted into the rack.
9 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
3 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
DescriptionThe Siemens 6ES5526-3LA21 is an original CP 526 communications expansion module engineered for integration within Simatic S5 programmable logic controller systems. This board is specifically designed to manage advanced data processing, screen visualization tasks, and peripheral communication, serving as a critical hardware component for legacy automation infrastructure. By offloading complex communication protocols from the main CPU, it ensures the stability and efficiency of established control architectures in industrial environments such as power generation, chemical processing, and metal manufacturing.Features
Dedicated onboard microprocessor for autonomous communication management.
Optimized for integration with Simatic S5 backplane architectures.
Supports serial connectivity for operator interfaces and peripheral devices.
Reduces CPU overhead by handling data transmission and text string management locally.
Designed for high-reliability operation in long-term industrial deployments.
ApplicationsThis module is primarily utilized in mature S5-based control systems where reliable HMI connectivity and peripheral data exchange are required. It is an essential spare for maintaining legacy production lines, preventing unplanned downtime, and extending the operational lifespan of existing S5 PLC installations.Technical Specifications
Model
6ES5526-3LA21
Brand
Siemens
Series
Simatic S5
Module Type
CP 526 Expansion Board
Power Supply
5 VDC (via backplane)
Current Draw
1.2 A (typical)
Operating Temp
0 to 55 deg C
Storage Temp
-40 to 70 deg C
Humidity
95% (non-condensing)
Installation Guidelines
Ensure the PLC rack power is fully disconnected before inserting or removing the CP 526 module.
Handle the board by the edges to prevent electrostatic discharge (ESD) damage to sensitive internal components.
Verify that the module is correctly seated in the designated S5 backplane slot to ensure proper bus contact.
Maintain adequate ventilation around the PLC chassis to keep ambient temperatures within the specified 0 to 55 deg C range.
Use appropriate shielded cabling for serial connections to minimize electromagnetic interference (EMI) in high-noise industrial environments.
FAQIs the 6ES5526-3LA21 compatible with all S5 systems?The CP 526 is designed for specific Simatic S5 configurations. Please verify your existing rack backplane and CPU compatibility before installation to ensure the module is supported by your current hardware revision.Does this module require external power?No, the 6ES5526-3LA21 draws its required 5 VDC power directly from the S5 backplane bus.
3 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
7 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
The Honeywell MU-TAIH02 is a robust high-level analog input processor engineered for precise signal acquisition within industrial process control environments. This module is designed to interface with a variety of field transmitters, including 2-wire and self-powered devices, providing reliable data conversion for complex automation tasks in power generation, chemical processing, and refinery operations.Features
16 differential analog input channels for high-density signal monitoring.
16-bit A/D conversion architecture ensuring high measurement resolution and stability.
Comprehensive support for standard process signals, including 0-5V, 1-5V, 0.4-2V, and 4-20mA.
Integrated signal conditioning with single-pole RC filtering to mitigate normal mode interference.
High common mode rejection (70 dB) to maintain signal integrity in electrically noisy environments.
Integrated protection circuitry capable of withstanding differential input voltages up to +/- 30V.
ApplicationsThe MU-TAIH02 is specifically suited for Distributed Control Systems (DCS) requiring continuous, high-accuracy monitoring. It is commonly deployed in turbine control, industrial instrumentation, and large-scale process automation where signal stability and noise immunity are critical to preventing system downtime.Technical Specifications
Model
MU-TAIH02
Channels
16 Differential
Input Ranges
0-5V, 1-5V, 0.4-2V, 4-20mA
Scan Rate
4 samples/second per channel
Resolution
16-bit (14-bit utilized)
Common Mode Rejection
70 dB (DC to 60 Hz)
Normal Mode Rejection
32 dB at 60 Hz
Accuracy (23.5 degC)
+/- 0.075% full scale
Operating Temperature
0 to 50 degC
Installation Guidelines
Ensure the system power is fully disconnected before installing or removing the module from the chassis.
Handle the module using proper ESD (Electrostatic Discharge) mitigation techniques to prevent damage to internal circuitry.
Use shielded twisted-pair cabling for all analog inputs to minimize EMI/RFI interference.
Maintain proper ground connections for the chassis to ensure effective common mode noise suppression.
Check that input signal wiring does not exceed the +/- 30V maximum input voltage threshold to avoid hardware failure.
Verify that the module is firmly seated in the rack to maintain secure electrical contact with the backplane.
FAQWhat is the primary function of the MU-TAIH02?It serves as an analog input processor that converts voltage and current signals from field transmitters into a format suitable for digital processing within a Honeywell DCS.Does this module support 4-20 mA signals?Yes, the module supports 4-20 mA input signals using an integrated 250 Ohm resistance conversion.What is the sampling rate of this unit?The module performs a full scan of all 16 channels within a 250 ms window, resulting in a rate of 4 samples per second for each individual channel.
7 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
7 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
Description
The Emerson Ovation 2840A21G01 is a high-performance Quad Analog Output (QAO) module engineered for integration into Ovation distributed control systems. This board serves as a critical interface for regulatory control, converting digital control signals into precise analog outputs required for the operation of field instrumentation. It is widely utilized in power generation, industrial processing, and water management systems to drive actuators such as control valves, dampers, and frequency converters with high fidelity and minimal signal latency.
Features
4-channel analog output configuration for multi-loop control.
Galvanic isolation between channels to ensure signal integrity and protect against ground loops.
Designed for high-speed communication with the controller backplane.
Integrated noise-suppression circuitry to mitigate the effects of electromagnetic interference in industrial environments.
Optimized for stable, long-term operation in continuous process control applications.
Applications
This module is typically deployed in regulatory control loops where high-accuracy signal conversion is required. Common applications include the modulation of final control elements, such as modulating valve positioners, speed references for variable frequency drives (VFDs), and process setpoint management for dampers or feed pumps.
Technical Specifications
Model
2840A21G01
Brand
Emerson Ovation
Output Channels
4
Operating Temperature
0 deg C to 60 deg C
Power Consumption
5 W (typical)
Mounting Type
Rack-mounted PC board
Installation Guidelines
Ensure the control system is powered down before inserting or removing the board to prevent electrical damage.
Handle the module using proper ESD (Electrostatic Discharge) precautions to avoid damaging sensitive surface-mount components.
Verify that the module is fully seated in the rack backplane to ensure reliable communication.
Route output signal wiring away from high-voltage power cables to minimize induced noise and signal interference.
Maintain adequate cabinet ventilation to ensure the ambient temperature remains within the specified operating range of 0 deg C to 60 deg C.
FAQ
What is the primary function of the 2840A21G01?This board is a Quad Analog Output (QAO) module used to convert digital commands from the Ovation control system into analog signals for field device actuation.
Is this module compatible with other Ovation systems?The 2840A21G01 is designed specifically for the Ovation platform. Please verify your system's hardware revision and compatibility requirements before installation.
What should I do if my output signals appear unstable?First, check for proper grounding of the output loop and ensure that signal cables are shielded and properly terminated. If instability persists, verify that the module is correctly seated in the rack and that there is no localized overheating in the cabinet.
7 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
7 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
DescriptionThe Triconex 2755-020 is a high-performance digital output module engineered for safety-critical control systems. Utilizing the robust Triple-Modular Redundant (TMR) architecture characteristic of the Triconex platform, this assembly ensures high availability and fault tolerance in environments where system reliability is non-negotiable. It is specifically designed to interface with field devices in demanding sectors such as petrochemical refining, power generation, and large-scale industrial automation, providing secure and accurate switching for safety-instrumented systems.Features
TMR Architecture: Built to support fault-tolerant operations, ensuring that the system remains functional even during component-level failures.
High-Density Switching: Provides 16 independent output channels suitable for complex control loops.
Electrical Isolation: Features optical isolation on every channel to effectively mitigate the risks of electrical transients, surges, and common-mode interference from the field.
Real-Time Diagnostics: Includes advanced internal monitoring circuitry that detects open-load and short-circuit conditions, providing immediate feedback to the main processor.
Hot-Swappable Design: Engineered for integration with standard Triconex backplanes, supporting maintenance without requiring a total system shutdown.
ApplicationsThis digital output assembly is ideal for safety-instrumented systems (SIS) that require high-integrity signal distribution. It is commonly deployed in emergency shutdown (ESD) systems, fire and gas detection arrays, and critical process control applications where unplanned downtime must be minimized.Technical Specifications
Model Number
2755-020
Manufacturer
Triconex
Output Channels
16 Independent Points
Power Consumption
25 W (Typical)
Operating Temperature
0 to 60 degC
Installation Guidelines
Ensure the Triconex backplane is powered down before inserting or removing the 2755-020 module to prevent electrical arcing or damage to the backplane pins.
Verify that the module is fully seated and the locking mechanisms are engaged to maintain a secure connection to the system bus.
Use shielded cabling for field connections to minimize EMI/RFI interference in high-noise industrial environments.
Maintain adequate ventilation within the cabinet; ensure the module is not obstructed by wiring or other components to allow for proper heat dissipation.
Follow standard ESD (Electrostatic Discharge) precautions when handling the module to protect sensitive internal logic components.
FAQDoes the 2755-020 support online replacement?Yes, the module is designed for use within the Triconex fault-tolerant backplane, which supports hot-swapping or online module replacement during system operation.What type of diagnostics does this module perform?The 2755-020 continuously monitors its output circuits for faults such as short circuits or open loads, reporting these statuses to the processor in real-time to ensure the integrity of safety-critical commands.
7 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
3 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
DescriptionThe Allen-Bradley 1756-ENET is a communication interface module designed for the ControlLogix platform, providing connectivity to EtherNet/IP networks. This bridge module facilitates data exchange between the ControlLogix backplane and Ethernet-based devices, enabling integrated control and information management across industrial automation systems. Please note that this module was officially discontinued by the manufacturer on June 23, 2010. When ordering, please specify whether you require Series A or Series B hardware to ensure compatibility with your existing rack configuration.Features
Provides EtherNet/IP communication bridge capabilities for ControlLogix chassis.
Supports linear network topologies for simplified cabling and integration.
Designed for high-performance data transfer at 10 Mbps speeds.
Integrates directly into the 1756 backplane for seamless data access.
Robust industrial design suitable for standard ControlLogix rack environments.
Technical Specifications
Model
1756-ENET
Communication Rate
10 Mbps
Topologies
Linear
Backplane Current (5.1V DC)
900 mA
Backplane Current (24V DC)
350 mA
Max Power Dissipation
13.3 Watts
Weight
0.3 kg
Installation Guidelines
Ensure the ControlLogix chassis power is removed before inserting or removing the module.
Verify that the module is fully seated in the chassis slot and the top and bottom latches are locked.
Use appropriate shielded Ethernet cabling to minimize EMI interference in industrial environments.
Handle with care to prevent electrostatic discharge (ESD) damage to the internal circuitry.
Confirm firmware compatibility with your existing ControlLogix controller before deployment.
FAQIs the 1756-ENET module still in production? No, this module was discontinued by Allen-Bradley on June 23, 2010. We supply tested, reliable units for legacy system maintenance.What is the difference between Series A and Series B? These represent different hardware revisions of the module. Please verify your system requirements or existing hardware series to ensure full compatibility when replacing a unit.Does this module support 100 Mbps Ethernet? No, the 1756-ENET is a 10 Mbps communication module. For higher speed requirements, consider newer generation ControlLogix Ethernet modules.
3 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
9 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
DescriptionThe Honeywell MC-GAIH14 is a high-level analog input STI (Signal Termination Interface) module engineered for integration within Honeywell distributed control systems. This module is specifically designed to facilitate the acquisition of process-critical analog signals from field instrumentation, such as 4-20 mA transmitters, ensuring precise data conversion and signal stability in demanding industrial environments.Features
High-level analog input signal processing for robust process monitoring.
Integrated compression terminal design for secure and reliable field wiring connections.
Optimized for performance in high-density control cabinet configurations.
Enhanced noise immunity and signal conditioning circuitry for consistent accuracy.
Designed for seamless compatibility with Honeywell Experion PKS and related control I/O architectures.
ApplicationsThis module is widely utilized across process-intensive industries, including petrochemical refining, power generation, and large-scale manufacturing. It serves as a critical component in control loops where reliable, high-fidelity analog signal transmission is essential for maintaining operational safety and process efficiency.Technical Specifications
Model
MC-GAIH14
Input Signal Range
4 to 20 mA, High Level Analog
Termination Type
Compression Terminal
Power Consumption
Approx. 5 W
Operating Temperature
0 to 60 deg C
Storage Temperature
-40 to 85 deg C
Relative Humidity
5 % to 95 % Non-condensing
Isolation
Industrial Signal Isolation
Installation Guidelines
Ensure the control system is powered down before inserting or removing the module from the rack.
Verify that the cabinet environment is within the specified temperature range (0 to 60 deg C) to prevent thermal degradation.
Use appropriate ESD protection measures when handling the module to avoid damage to internal circuitry.
Ensure that compression terminals are tightened to provide firm contact, minimizing the risk of signal intermittency due to vibration.
Route analog signal cables away from high-voltage power lines and high-EMI sources to maintain signal integrity.
Confirm proper grounding of the control cabinet to facilitate effective noise shielding.
FAQWhat type of signals does the MC-GAIH14 accept?The module is designed for high-level analog inputs, typically handling 4-20 mA process loops common in industrial instrumentation.Is this module compatible with the Experion PKS system?Yes, the MC-GAIH14 is part of the Honeywell I/O family designed for use within the Experion PKS and related distributed control system architectures.What is the primary benefit of the compression terminal interface?The compression terminal provides a secure, vibration-resistant connection, which is vital for maintaining consistent signal continuity in industrial cabinets.
9 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
8 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
The Schneider Electric TSXP57153M is a high-performance processor unit designed for the Modicon TSX Premium automation platform. As a core component of the PL7 processor series, this single-format module provides reliable control and logic processing capabilities for complex industrial automation tasks.Features
Designed for the Schneider Electric TSX Premium PLC series.
Integrated PL7 processor architecture for efficient instruction execution.
Single-format module design for standard rack mounting.
Optimized for demanding industrial control environments.
Technical Specifications
Model
TSXP57153M
Manufacturer
Schneider Electric
Product Series
TSX Premium
Processor Type
PL7 CPU
Supply Voltage
5 VDC
Current Consumption
530 mA
Status
Discontinued by Manufacturer
Installation Guidelines
Ensure the PLC rack is powered down before inserting or removing the TSXP57153M module to prevent damage to the backplane connectors.
Verify that the module is fully seated in the designated slot and that the locking mechanism is engaged to ensure proper electrical contact.
Maintain adequate ventilation within the control cabinet to prevent overheating during operation.
Adhere to standard ESD (Electrostatic Discharge) handling procedures when touching internal components or connector pins.
Route signal and power cables separately to minimize electromagnetic interference (EMI) risks.
FAQIs this unit still supported by the manufacturer?No, the TSXP57153M has been discontinued by Schneider Electric. We offer these units as refurbished or surplus stock to support existing legacy installations.What software is required to program this processor?This CPU is typically programmed using the PL7 Pro software environment, consistent with the TSX Premium product family requirements.
8 dalam stok
Pengiriman dalam waktu 48 jam, bayar setelahnya
Pertengahan minggu Senin sampai Jumat kami menawarkan pengiriman hari berikutnya jika produk tersedia dan pengecualian pada hari libur.
Akhir pekan Kami tidak menawarkan pengiriman di akhir pekan.
Internasional Tergantung lokasi Anda, kami menawarkan pengiriman keesokan harinya. Periksa status pengiriman Anda di tautan ini.
DescriptionThe Allen-Bradley 1756-EN2TXT is a high-performance EtherNet/IP communication bridge module designed for the ControlLogix platform. Engineered specifically for the Logix-XT series, this module provides reliable network connectivity in extreme environments, ensuring robust operation in demanding industrial conditions where temperature, vibration, or humidity may exceed standard specifications.Features
Designed for extreme environment (XT) applications within the ControlLogix architecture.
Supports high-speed 10/100 Mbps communication via EtherNet/IP protocol.
Capable of managing up to 128 TCP/IP connections simultaneously for complex control networks.
Seamless integration with existing ControlLogix backplanes for simplified configuration and maintenance.
ApplicationsThis module is ideal for deployment in heavy industrial settings, including oil and gas, remote infrastructure, and outdoor control cabinets where environmental stress is a factor. It serves as the primary interface for bridging ControlLogix controllers to plant-wide Ethernet networks.Technical Specifications
Manufacturer
Allen-Bradley
Model
1756-EN2TXT
Product Type
EtherNet/IP Bridge Module
Series
ControlLogix XT
Communication Speed
10/100 Mbps
TCP/IP Connections
Up to 128
Weight
0.15 kg
Installation Guidelines
Ensure the ControlLogix chassis is powered down before inserting or removing the module to prevent electrical damage.
Verify that the module is fully seated in the chassis slot and secured using the top and bottom latching mechanisms.
Use industrial-grade, shielded Ethernet cabling to minimize EMI/RFI interference in high-noise environments.
Maintain proper ventilation around the chassis to support the XT rating and ensure consistent thermal performance.
Follow standard ESD (Electrostatic Discharge) precautions when handling the module to protect sensitive internal components.
FAQWhat does the 'XT' designation mean for this module?The XT designation indicates that this module is built for extreme environments, offering enhanced protection against harsh conditions such as temperature extremes and corrosive atmospheres compared to standard modules.Is this module compatible with standard ControlLogix chassis?Yes, the 1756-EN2TXT is fully compatible with standard ControlLogix chassis, allowing it to be used in both standard and XT-rated control systems.
