{"product_id":"digital-output-module-adv561p00s2-yokogawa-new-original-stock","title":"Digital Output Module ADV561P00S2 Yokogawa | New \u0026 Original Stock","description":"\u003ch1\u003eYokogawa ADV561P00S2 Digital Output Module\u003c\/h1\u003e\n\u003cp\u003eThe\u003cstrong\u003eYokogawa ADV561P00S2\u003c\/strong\u003eserves as the primary\u003cstrong\u003eADV561P00S2 Digital Output Module\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eutilized to execute discrete field device switching across CENTUM VP I\/O subsystem platforms. Configured for transistor-based current sink output operation in a 24 VDC load environment, the module provides 64-channel digital output control with defined low-level output saturation behavior and integrated status feedback handling.\u003c\/p\u003e\n\u003ch3\u003eSuffix Breakdown \u0026amp; Model Matrix\u003c\/h3\u003e\n\u003cp\u003eNo validated suffix segmentation is defined in the provided technical data for ADV561P00S2. The full model string is treated as a single ordered part number.\u003c\/p\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr class=\"firstRow\"\u003e\n\u003cth\u003eParameter\u003c\/th\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModelBrand\u003c\/td\u003e\n\u003ctd\u003eYokogawa ADV561P00S2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eJAPAN\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.3kg\u003cbr\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChannel Count\u003c\/td\u003e\n\u003ctd\u003e64 digital output channels\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput Type\u003c\/td\u003e\n\u003ctd\u003eTransistor current sink\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRated Load Voltage\u003c\/td\u003e\n\u003ctd\u003e24 VDC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput ON Voltage Drop\u003c\/td\u003e\n\u003ctd\u003eMax 2 VDC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eYokogawa Field I\/O Signal Conditioning and Channel Architecture\u003c\/h3\u003e\n\u003cp\u003eWithin Yokogawa Field I\/O architectures, the ADV561 series implements transistor-based switching elements optimized for discrete signal interfacing with field actuators. Channel-to-channel electrical isolation architecture is applied at the module backplane interface level, supporting deterministic ON\/OFF state execution with minimized leakage current propagation across adjacent output channels. The design aligns with DCS-level digital signal conditioning requirements where stable sink-current behavior is required under 24 VDC load distribution networks.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003eQ: Can the ADV561P00S2 outputs be hot-swapped under load conditions?\u003cbr\u003eA: Hot-swap capability is dependent on CENTUM VP base unit configuration. Field wiring must be de-energized prior to module insertion or removal to avoid transient backfeed into transistor output stages.\u003c\/p\u003e\n\u003cp\u003eQ: What is the electrical behavior during output OFF state?\u003cbr\u003eA: In OFF state, output transistors present high impedance with leakage current limited by internal suppression circuitry, maintaining isolation from 24 VDC load rails.\u003c\/p\u003e\n\u003cp\u003eQ: Does channel activation introduce measurable propagation delay?\u003cbr\u003eA: Output response is governed by internal scan cycle timing of the I\/O subsystem, typically aligned with DCS task scheduling rather than discrete hardware switching delay.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003cp\u003eThe module shall be installed in a compatible Yokogawa CENTUM VP or Field I\/O rack system with verified backplane alignment. Ensure that all field wiring is terminated according to current sink output topology, with proper common return routing to avoid floating reference conditions.\u003c\/p\u003e\n\u003cp\u003eShielded cables are recommended for long-distance actuator connections. Shield termination should be performed at a single-point ground reference to reduce ground loop formation across multi-channel output groups.\u003c\/p\u003e\n\u003cp\u003eBackplane connectors must be fully seated without mechanical stress. Avoid applying torque or lateral force during insertion to prevent contact misalignment in the I\/O rack interface.\u003c\/p\u003e","brand":"Yokogawa","offers":[{"title":"Default Title","offer_id":44139969019992,"sku":"ADV561-P00","price":100.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0670\/2039\/0488\/files\/ADV561-P00.jpg?v=1779680022","url":"https:\/\/www.industriaxplc.com\/products\/digital-output-module-adv561p00s2-yokogawa-new-original-stock","provider":"IndustriaX Limited","version":"1.0","type":"link"}