{"product_id":"bently-nevada-330101-00-30-10-02-00-3300-xl-8-mm-proximity-probes","title":"Bently Nevada 330101-00-30-10-02-00 3300 XL 8 mm Proximity Probes","description":"\u003ch2\u003eBently Nevada 330101-00-30-10-02-00 3300 XL 8 mm Proximity Probes\u003c\/h2\u003e\n\u003cp\u003eConfigured for mechanical vibration and position monitoring in TSI systems, the \u003cstrong\u003eBently Nevada 330101-00-30-10-02-00\u003c\/strong\u003e (\u003cstrong\u003e330101\u003c\/strong\u003e 3300 XL 8 mm Probe) provides direct physical\/electrical execution. It operates as a proximity transducer to measure static and dynamic distance variations between the probe tip and the target shaft surface, transforming mechanical displacement into proportional electrical signals for machinery protection infrastructure.\u003c\/p\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel Brand\u003c\/td\u003e\n\u003ctd\u003eBently Nevada\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eUSA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.1 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e58.5 x 1.5 x 1.5 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThread Type\u003c\/td\u003e\n\u003ctd\u003e3\/8-24 UNF thread, without armor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUnthreaded Length Option\u003c\/td\u003e\n\u003ctd\u003e0.0 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOverall Case Length Option\u003c\/td\u003e\n\u003ctd\u003e3.0 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTotal Length Option\u003c\/td\u003e\n\u003ctd\u003e1.0 meter (3.3 feet)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnector and Cable Type\u003c\/td\u003e\n\u003ctd\u003eMiniature coaxial ClickLoc connector, standard cable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAgency Approval Option\u003c\/td\u003e\n\u003ctd\u003eNot required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003e-51 degC to +177 degC (Standard industrial rating)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003ePassive sensor component (Powered by external Proximitor Sensor)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTariff Code\u003c\/td\u003e\n\u003ctd\u003e8537101190\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eEddy-Current Probe Scaling and Gap Voltage Validation\u003c\/h3\u003e\n\u003cp\u003eThe probe operates on eddy-current principles, requiring precise calibration against an AISI 4140 steel target to maintain a standard scale factor of 7.87 V\/mm (200 mV\/mil). During field installation, gap voltage validation must be conducted using a digital multimeter. Adjust the physical gap until the Proximitor output reaches a -10 VDC target, representing the midpoint of the linear operating range. This setup suppresses cross-talk anomalies when multiple probes are installed in close proximity, ensuring accurate rotor dynamics monitoring without phase lag or signal degradation.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003eQ: Can this probe be connected directly to a standard DCS analog input card?\u003c\/p\u003e\n\u003cp\u003eA: No. The probe is a passive inductive component and must be matched with a 3300 XL Proximitor Sensor. The Proximitor converts the impedance changes into a -200 mV\/mil analog voltage signal suitable for TSI monitors or specialized high-speed inputs.\u003c\/p\u003e\n\u003cp\u003eQ: What is the mechanical limitation for installing adjacent 8 mm probes?\u003c\/p\u003e\n\u003cp\u003eA: To prevent cross-talk suppression failures and signal interference from adjacent magnetic fields, a minimum spacing of 40 mm (1.6 in) between probe tips must be maintained unless specific staggered frequency configurations are used.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Engagement:\u003c\/strong\u003e Ensure the 3\/8-24 UNF threads engage smoothly without cross-threading. Use a calibrated torque wrench to avoid crushing the internal coaxial transition point inside the case.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClickLoc Connector Handling:\u003c\/strong\u003e Do not use pliers or metallic tools to tighten the miniature coaxial ClickLoc connector. Finger-tighten until the positive click detent is felt. Ensure the connection remains clean, dry, and free of oil or moisture contamination.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShield Grounding:\u003c\/strong\u003e The coaxial cable shield must be isolated from the machine casing and grounded exclusively at the Proximitor Sensor common terminal within the instrumentation enclosure to prevent ground loop noise.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRouting Limitations:\u003c\/strong\u003e Observe the minimum bend radius of 25.4 mm (1.0 in) for the standard coaxial cable during installation to avoid dielectric deformation and subsequent signal attenuation.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":44269297893464,"sku":"330101-00-30-10-02-00","price":100.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0670\/2039\/0488\/files\/330101-00-30-10-02-00-3.jpg?v=1782198206","url":"https:\/\/www.industriaxplc.com\/products\/bently-nevada-330101-00-30-10-02-00-3300-xl-8-mm-proximity-probes","provider":"IndustriaX Limited","version":"1.0","type":"link"}