{"product_id":"bently-nevada-330101-00-10-10-02-cn-3300-xl-8-mm-proximity-probe","title":"Bently Nevada 330101-00-10-10-02-CN 3300 XL 8 mm Proximity Probe","description":"\u003ch2\u003eBently Nevada 330101-00-10-10-02-CN 3300 XL 8 mm Proximity Probe\u003c\/h2\u003e\n\u003cp\u003eConfigured for shaft vibration measurement in Bently Nevada 3300 XL series machinery protection systems, the \u003cstrong\u003eBently Nevada 330101-00-10-10-02-CN\u003c\/strong\u003e (\u003cstrong\u003e330101\u003c\/strong\u003e proximity probe) provides direct physical displacement detection via eddy-current sensing for continuous rotor position monitoring.\u003c\/p\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eParameter\u003c\/th\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel Brand\u003c\/td\u003e\n\u003ctd\u003eBently Nevada\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eUSA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.1 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e104 x 1.5 x 1.2 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003e-35 degC to +177 degC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003ePassive sensor, no external power\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThread Type\u003c\/td\u003e\n\u003ctd\u003e3\/8-24 UNF\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUnthreaded Length\u003c\/td\u003e\n\u003ctd\u003e0.0 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCase Length\u003c\/td\u003e\n\u003ctd\u003e1.0 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTotal Length\u003c\/td\u003e\n\u003ctd\u003e1.0 m (3.3 ft)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnector Type\u003c\/td\u003e\n\u003ctd\u003eMiniature coaxial ClickLoc connector\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eEddy-Current Probe Scaling and Gap Voltage Validation\u003c\/h3\u003e\n\u003cp\u003eThe 330101 probe utilizes a calibrated eddy-current field to translate target displacement into proportional voltage output. Gap voltage validation targets -10 VDC at nominal probe-to-target spacing to ensure linear response across the defined measuring range. Signal scaling is matched to the 3300 XL extension cable and driver module to maintain system-level accuracy. Cross-talk suppression is achieved through precise shielding and impedance matching within the probe assembly.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eQ:\u003c\/strong\u003e Can the 330101 probe be used with non-Bently Nevada driver modules?\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e No. Eddy-current probe scaling is specific to the 3300 XL driver module; mismatched drivers will cause inaccurate displacement readings.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ:\u003c\/strong\u003e What is the minimum bending radius for the standard cable?\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e Maintain a minimum bend radius of 25 mm to prevent coaxial conductor deformation and signal loss.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ:\u003c\/strong\u003e Does the probe require recalibration after installation?\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e Recalibration is not required if installed within specified gap voltage and temperature limits, but verification against baseline gap voltage is recommended.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003cp\u003eInstall the probe with its tip perpendicular to the target surface to avoid angular error in displacement readings. Secure the probe body using proper thread engagement (minimum 5 full threads). Ground the shield of the coaxial cable at the driver module end only to prevent ground loops. Route the probe cable away from high-voltage conductors and switching devices to minimize electromagnetic interference. Verify gap voltage immediately after mechanical installation using the driver module’s test points.\u003c\/p\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":44266172907608,"sku":"330101-00-10-10-02-cn","price":100.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0670\/2039\/0488\/files\/330101-00-10-10-02-cn-3.jpg?v=1782113153","url":"https:\/\/www.industriaxplc.com\/products\/bently-nevada-330101-00-10-10-02-cn-3300-xl-8-mm-proximity-probe","provider":"IndustriaX Limited","version":"1.0","type":"link"}