{"product_id":"bently-nevada-21000-16-05-15-098-03-02-proximity-probe-housing-assembly","title":"Bently Nevada 21000-16-05-15-098-03-02 Proximity Probe Housing Assembly","description":"\u003ch2\u003eBently Nevada 21000-16-05-15-098-03-02 Proximity Probe Housing Assembly\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eBently Nevada 21000-16-05-15-098-03-02\u003c\/strong\u003e, also cataloged as the \u003cstrong\u003e21000\u003c\/strong\u003e Proximity Probe Housing Assembly, serves as a dedicated mechanical interface for eddy-current proximity probe installation and alignment within Bently Nevada 3300 XL Transducer Systems. It provides direct physical support and environmental sealing for precision shaft vibration measurement circuits.\u003c\/p\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eParameter\u003c\/th\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel Brand\u003c\/td\u003e\n\u003ctd\u003eBently Nevada\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eUSA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e1.08 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e8.5 x 8.5 x 30.5 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003e-40 to 85 degC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003ePassive component, no power required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting Thread\u003c\/td\u003e\n\u003ctd\u003e3\/4-14 NPT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable Gland Range\u003c\/td\u003e\n\u003ctd\u003e1\/8 to 3\/8 inches OD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProbe Compatibility\u003c\/td\u003e\n\u003ctd\u003e3300 XL 8 mm Eddy-Current Proximity Probe\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eEddy-Current Probe Scaling and Gap Voltage Validation\u003c\/h3\u003e\n\u003cp\u003eThis housing assembly supports precise eddy-current probe scaling by maintaining fixed probe standoff distances relative to the target surface. Gap voltage validation targets -10 VDC at nominal clearance, ensuring linear transducer response for rotor dynamics monitoring. Cross-talk suppression is achieved via rigid mechanical isolation from adjacent sensor assemblies, minimizing electromagnetic interference in densely instrumented machinery trains.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003eQ: Can this housing be installed without removing the proximity probe?\u003c\/p\u003e\n\u003cp\u003eA: No. The probe must be inserted into the housing prior to final mounting to ensure correct axial positioning and avoid damage to the probe tip.\u003c\/p\u003e\n\u003cp\u003eQ: Is hot-swapping supported for the probe within this assembly?\u003c\/p\u003e\n\u003cp\u003eA: No. System shutdown is required before removal or replacement to prevent erroneous transient signals and potential damage to the conditioning electronics.\u003c\/p\u003e\n\u003cp\u003eQ: What torque specification applies to the NPT thread engagement?\u003c\/p\u003e\n\u003cp\u003eA: Use standard NPT pipe thread engagement of at least 5 full threads with appropriate thread sealant; torque values should follow ASME B1.20.1 guidelines for 3\/4-14 NPT steel fittings.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003cp\u003eMount the assembly directly to a rigid machine structure using the 3\/4-14 NPT threaded boss. Apply compatible anti-seize compound if stainless-to-stainless threading is used. Ensure the probe cable shield is grounded at the termination point only, avoiding ground loops. Maintain minimum bend radius of the probe cable to prevent signal attenuation. Verify probe standoff distance with calibrated feeler gauges before final tightening.\u003c\/p\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":44265865642072,"sku":"21000-16-05-15-098-03-02","price":100.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0670\/2039\/0488\/files\/21000-16-05-15-098-03-02-3.jpg?v=1782111785","url":"https:\/\/www.industriaxplc.com\/products\/bently-nevada-21000-16-05-15-098-03-02-proximity-probe-housing-assembly","provider":"IndustriaX Limited","version":"1.0","type":"link"}