{"product_id":"bently-nevada-164952-01-01-proximity-probe-sleeve","title":"Bently Nevada 164952-01-01 Proximity Probe Sleeve","description":"\u003ch2\u003eBently Nevada 164952-01-01 Proximity Probe Sleeve\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eBently Nevada 164952-01-01\u003c\/strong\u003e, also cataloged as the \u003cstrong\u003e164952-01-01\u003c\/strong\u003e Proximity Probe Sleeve, serves as the primary mechanical mounting adapter utilized to execute eddy current proximity probe positioning and gap establishment across Bently Nevada vibration monitoring platforms. It provides a fixed interface between machine casing penetration points and the installed proximity transducer assembly.\u003c\/p\u003e\n\u003ch3\u003eSuffix Breakdown \u0026amp; Model Matrix\u003c\/h3\u003e\n\u003cp\u003eNo manufacturer-published decomposition of the “-01-01” suffix is defined in public technical documentation for this part number. Configuration interpretation is system-dependent and determined by probe housing geometry, thread standard selection, and seal arrangement defined at installation level.\u003c\/p\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eParameter\u003c\/th\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003e164952-01-01\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eBently Nevada\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eUSA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.1kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003e-51 deg C to +177 deg C (application dependent seal material)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003ePassive mechanical component\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\u003ctd\u003eProximity Probe Sleeve \/ Mounting Adapter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eStainless steel (typically 303 or 316 class)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThread Interface\u003c\/td\u003e\n\u003ctd\u003eIndustrial threaded housing interface (NPT or metric variants dependent on machine design)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSealing Method\u003c\/td\u003e\n\u003ctd\u003eO-ring or compression sealing arrangement (configuration dependent)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eEddy-Current Probe Scaling and Gap Voltage Validation (Bently Nevada TSI Context)\u003c\/h3\u003e\n\u003cp\u003eWithin Bently Nevada proximity measurement chains, the sleeve defines the mechanical reference axis used for eddy-current probe linearization. Probe standoff calibration is performed against a defined gap voltage transfer function, typically centered around negative DC bias regions (including -10 VDC nominal scaling references in system-level transducer output mapping). Mechanical misalignment introduced at the sleeve interface directly propagates into rotor dynamic measurement error, particularly affecting synchronous vibration and axial position tracking.\u003c\/p\u003e\n\u003cp\u003eCross-talk suppression is primarily governed by probe concentricity within the sleeve bore and shielding continuity between probe body and machine casing. Improper sleeve seating can introduce phase distortion in eddy-current signal return paths under high shaft rotational velocity conditions.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions (FAQ)\u003c\/h3\u003e\n\u003cp\u003eQ: Does the 164952-01-01 support hot-swap probe replacement under pressure boundary conditions?\u003cbr\u003eA: No. Probe removal requires system depressurization and mechanical isolation of the mounting interface to prevent seal compromise and signal drift.\u003c\/p\u003e\n\u003cp\u003eQ: What is the electrical implication of sleeve misalignment on proximity probe output?\u003cbr\u003eA: Misalignment introduces nonlinear variation in the eddy-current field, resulting in degraded gap voltage linearity and increased noise in vibration amplitude measurement.\u003c\/p\u003e\n\u003cp\u003eQ: Can the sleeve affect back-end proximitor driver calibration stability?\u003cbr\u003eA: Yes. Mechanical drift or thread relaxation alters the probe-to-target transfer curve, impacting calibrated output stability of the proximitor system.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003cp\u003eThe sleeve shall be installed using verified thread engagement depth consistent with machine casing design specification. O-ring or sealing element must be inspected for compression uniformity prior to final torque locking. Probe axial insertion must maintain coaxial alignment with shaft target surface to preserve eddy-current field symmetry.\u003c\/p\u003e\n\u003cp\u003eCable routing from probe head should avoid high electromagnetic interference zones and maintain separation from high-voltage conductors. Grounding continuity between machine casing and monitoring system reference ground must be verified to prevent signal offset due to potential difference accumulation.\u003c\/p\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":44301864960088,"sku":"164952-01-01","price":100.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0670\/2039\/0488\/files\/164952-01-01.jpg?v=1782899436","url":"https:\/\/www.industriaxplc.com\/products\/bently-nevada-164952-01-01-proximity-probe-sleeve","provider":"IndustriaX Limited","version":"1.0","type":"link"}