{"product_id":"avr10d-q22020-yokogawa-duplexed-vnet-router","title":"AVR10D-Q22020 | Yokogawa Duplexed VNet Router","description":"\u003ch2\u003eYokogawa AVR10D-Q22020 Duplexed VNet Router\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eYokogawa AVR10D-Q22020\u003c\/strong\u003e, also cataloged as the \u003cstrong\u003eAVR10D\u003c\/strong\u003e Duplexed VNet Router, operates as a dedicated hardware component for bridging Vnet\/IP and legacy 10 Mbps V net networks within CENTUM VP systems. It provides direct packet forwarding and network isolation between dual-redundant communication domains.\u003c\/p\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eParameter\u003c\/th\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModelBrand\u003c\/td\u003e\n\u003ctd\u003eYokogawa AVR10D-Q22020\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eJapan\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003eApproximately 2.5 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e210 mm (W) x 230 mm (H) x 80 mm (D)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperatingTemp\u003c\/td\u003e\n\u003ctd\u003e-10 degC to +55 degC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperatingHumidity\u003c\/td\u003e\n\u003ctd\u003e5% to 95% RH\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePowerConsumption\u003c\/td\u003e\n\u003ctd\u003eApproximately 20 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePowerSupply\u003c\/td\u003e\n\u003ctd\u003e100-120 VAC or 220-240 VAC, 50\/60 Hz, Dual Redundant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVnet\/IP Interface\u003c\/td\u003e\n\u003ctd\u003e100 Mbps, full-duplex, RJ45 connector\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eV net Interface\u003c\/td\u003e\n\u003ctd\u003e10 Mbps, BNC connector, dual-redundant or single\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting\u003c\/td\u003e\n\u003ctd\u003eRack mount (19-inch), 4 x M5 screws\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eContact Output\u003c\/td\u003e\n\u003ctd\u003eM4 screw terminal for system alerts\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eProcess Control Connectivity Features\u003c\/h3\u003e\n\u003cp\u003eThe AVR10D-Q22020 supports \u003cstrong\u003echannel-to-channel isolation\u003c\/strong\u003e to prevent propagation of network noise across redundant domains. It allows deterministic routing of 100Base-TX and legacy V net traffic, with electrical isolation between Vnet\/IP ports and coaxial networks. Built-in failover mechanisms in dual-redundant power and communication modules ensure uninterrupted operation during hardware faults. The unit also maintains compatibility with standard 4-20 mA HART loops and FOUNDATION Fieldbus\/Profibus PA connections through connected controllers, preserving signal integrity across control layers.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eQ: VnA:\u003c\/strong\u003e Can the AVR10D-Q22020 modules be hot-swapped without network interruption?\u003cbr\u003e\u003cstrong\u003eA:\u003c\/strong\u003e Yes, dual-redundant modules support bumpless hot-swap; the secondary module takes over instantaneously with sub-millisecond failover.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: VnA:\u003c\/strong\u003e What is the maximum distance supported for Vnet\/IP connections?\u003cbr\u003e\u003cstrong\u003eA:\u003c\/strong\u003e Standard 100Base-TX cabling is supported up to 100 m to a Layer 2 switch; no signal repeaters are required within this range.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: VnA:\u003c\/strong\u003e Does firmware upgrade require shutdown of V net communication?\u003cbr\u003e\u003cstrong\u003eA:\u003c\/strong\u003e Firmware updates can be applied to one module while the redundant module maintains network operation, ensuring no interruption.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eMount the router on a 19-inch rack using 4 x M5 screws. Ensure the unit is level to prevent strain on connectors.\u003c\/li\u003e\n\u003cli\u003eConnect power lines to dual-redundant inputs via M4 screw terminals. Verify phase and ground continuity before energizing.\u003c\/li\u003e\n\u003cli\u003eAttach Vnet\/IP and V net coaxial cables to the respective RJ45 and BNC connectors. Ensure correct termination on coaxial lines to prevent reflections.\u003c\/li\u003e\n\u003cli\u003eUse separate grounding for chassis and signal shields to minimize crosstalk. Maintain at least 10 mm separation from high-power cables.\u003c\/li\u003e\n\u003cli\u003eConfirm all redundant modules are seated and operational via the front panel LED indicators before commissioning.\u003c\/li\u003e\n\u003cli\u003eAvoid bending coaxial lines below 50 mm radius; secure cables to prevent mechanical stress.\u003c\/li\u003e\n\u003cli\u003eContact output terminals can be wired to local alarm panels; ensure voltage ratings are compatible.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"Yokogawa","offers":[{"title":"Default Title","offer_id":44163170041944,"sku":"AVR10D-Q22020","price":100.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0670\/2039\/0488\/files\/AVR10D-Q22020-2.jpg?v=1780282812","url":"https:\/\/www.industriaxplc.com\/products\/avr10d-q22020-yokogawa-duplexed-vnet-router","provider":"IndustriaX Limited","version":"1.0","type":"link"}