{"product_id":"3300-xl-8mm-proximity-probe-bently-nevada-330102-00-12-10-02-05","title":"3300 XL 8mm Proximity Probe | Bently Nevada 330102-00-12-10-02-05","description":"\u003ch2\u003eBently Nevada 330102-00-12-10-02-05 3300 XL 8 mm Probe\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eBently Nevada 330102-00-12-10-02-05\u003c\/strong\u003e, also cataloged as the \u003cstrong\u003e3300 XL 8 mm Probe\u003c\/strong\u003e (Armored), serves as the primary eddy-current proximity sensor utilized to execute non-contact shaft displacement and radial vibration transduction across 3300 XL Transducer System platforms.\u003c\/p\u003e\n\u003ch3\u003eSuffix Breakdown \u0026amp; Model Matrix\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003ePosition\u003c\/th\u003e\n\u003cth\u003eCode\u003c\/th\u003e\n\u003cth\u003eDefinition\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBase\u003c\/td\u003e\n\u003ctd\u003e330102\u003c\/td\u003e\n\u003ctd\u003e3300 XL 8 mm Probe, 3\/8-24 UNF thread, with armor (stainless steel armored cable jacket)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eA – Unthreaded Length\u003c\/td\u003e\n\u003ctd\u003e00\u003c\/td\u003e\n\u003ctd\u003e0.0 in unthreaded length (full thread engagement available)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eB – Case Length\u003c\/td\u003e\n\u003ctd\u003e12\u003c\/td\u003e\n\u003ctd\u003e1.2 in overall probe case length\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eC – Total Length\u003c\/td\u003e\n\u003ctd\u003e10\u003c\/td\u003e\n\u003ctd\u003e1.0 m (3.3 ft) total probe + cable length\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eD – Connector\/Cable\u003c\/td\u003e\n\u003ctd\u003e02\u003c\/td\u003e\n\u003ctd\u003eMiniature coaxial ClickLoc connector, standard cable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eE – Agency Approval\u003c\/td\u003e\n\u003ctd\u003e05\u003c\/td\u003e\n\u003ctd\u003eCSA, ATEX, IECEx Approvals\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eParameter\u003c\/th\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eBently Nevada\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eUSA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.12 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions (Shipping)\u003c\/td\u003e\n\u003ctd\u003e113 x 2 x 1.7 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003e-51 degC to +177 degC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003ePassive; driven by 3300 XL Proximitor Sensor (-24 VDC input)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProbe Tip Diameter\u003c\/td\u003e\n\u003ctd\u003e8 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThread\u003c\/td\u003e\n\u003ctd\u003e3\/8-24 UNF-2A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eArmor\u003c\/td\u003e\n\u003ctd\u003eStainless steel armored jacket\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLinear Range\u003c\/td\u003e\n\u003ctd\u003e2.0 mm (0.25–2.25 mm from target), output -1 to -17 VDC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSensitivity\u003c\/td\u003e\n\u003ctd\u003e7.87 V\/mm (200 mV\/mil) on AISI 4140 steel target\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable \/ Connector\u003c\/td\u003e\n\u003ctd\u003e1.0 m with miniature coaxial ClickLoc connector\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAgency Approvals\u003c\/td\u003e\n\u003ctd\u003eCSA, ATEX, IECEx\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eEddy-Current Probe Scaling and Gap Voltage Validation\u003c\/h3\u003e\n\u003cp\u003eThe 3300 XL 8 mm probe is factory-calibrated with a system sensitivity of 7.87 V\/mm referenced to an AISI 4140 steel target. Gap voltage validation targets -10 VDC (corresponding to a 1.27 mm probe-to-shaft air gap) when the probe is installed and the Proximitor is powered. Cross-talk suppression between adjacent probes in multi-channel TSI racks requires a minimum center-to-center spacing of 38 mm (1.5 in) to prevent mutual inductive interference affecting rotor dynamics data.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003eQ: Can the armored cable jacket be removed or shortened in the field?\u003c\/p\u003e\n\u003cp\u003eA: No. The cable length and armor are factory-terminated; cutting alters the tuned electrical characteristics and voids calibration. Order the correct total length at procurement.\u003c\/p\u003e\n\u003cp\u003eQ: Is the probe polarity-sensitive when connected to the extension cable?\u003c\/p\u003e\n\u003cp\u003eA: No. The ClickLoc connector enforces correct mating orientation, but the probe itself is not polarity-sensitive. Mismatched 3300-series (5 mm vs 8 mm) components must not be intermixed as system performance will degrade.\u003c\/p\u003e\n\u003cp\u003eQ: What is the recommended gap setting procedure?\u003c\/p\u003e\n\u003cp\u003eA: Install the probe, then adjust axial position while monitoring DC voltage at the Proximitor test point. Set to approximately -9 to -10 VDC (1.27 mm gap) for radial vibration; verify the target is within the 0.25–2.25 mm linear range.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003cp\u003eInstall the probe through the 3\/8-24 UNF threaded boss with a minimum of five full thread engagements. Torque the locknut to the machine manufacturer's specification; do not overtighten the probe body. Ensure the armored cable jacket is clamped or supported near the entry point to relieve strain. Ground the shield drain wire at the Proximitor\/monitor end only — never at the probe end — to prevent ground loops. Route the probe cable separately from AC power or switchgear conductors; maintain at least 150 mm separation. After installation, verify gap voltage before closing the junction box.\u003c\/p\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":44269414219864,"sku":"330102-00-12-10-02-05","price":100.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0670\/2039\/0488\/files\/330102-00-12-10-02-05-2.jpg?v=1782201431","url":"https:\/\/www.industriaxplc.com\/products\/3300-xl-8mm-proximity-probe-bently-nevada-330102-00-12-10-02-05","provider":"IndustriaX Limited","version":"1.0","type":"link"}