{"product_id":"bently-nevada-330101-00-12-10-02-00-3300-xl-8-mm-proximity-probe","title":"Bently Nevada 330101-00-12-10-02-00 3300 XL 8 mm Proximity Probe","description":"\u003ch2\u003eBently Nevada 330101-00-12-10-02-00 3300 XL 8 mm Proximity Probe\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eBently Nevada 330101-00-12-10-02-00\u003c\/strong\u003e, also cataloged as the \u003cstrong\u003e330101\u003c\/strong\u003e eddy-current proximity probe, operates as a dedicated hardware component for radial\/axial shaft displacement and vibration measurement within Bently Nevada 3300 XL Transducer System networks.\u003c\/p\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eParameter\u003c\/th\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel Brand\u003c\/td\u003e\n\u003ctd\u003eBently Nevada\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eUSA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.1 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e123 x 1.5 x 2 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003e-35 degC to +177 degC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003ePassive sensor, driven by 3300 XL driver\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThread Type\u003c\/td\u003e\n\u003ctd\u003e3\/8-24 UNF\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUnthreaded Length\u003c\/td\u003e\n\u003ctd\u003e0.0 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCase (Probe) Length\u003c\/td\u003e\n\u003ctd\u003e1.2 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTotal Length\u003c\/td\u003e\n\u003ctd\u003e1.0 m (3.3 ft)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnector Type\u003c\/td\u003e\n\u003ctd\u003eMiniature coaxial ClickLoc connector, standard cable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eArmor\u003c\/td\u003e\n\u003ctd\u003eWithout armor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eGap Voltage Validation and Eddy-Current Probe Scaling\u003c\/h3\u003e\n\u003cp\u003eThe probe must be paired with a matched 3300 XL extension cable and driver (proximitor) to maintain factory-calibrated eddy-current scaling of 200 mV\/mil (7.87 mV\/um). Gap voltage at the target setpoint is nominally -10 VDC; deviation indicates improper probe-to-shaft clearance or mismatched system components. Cross-talk between adjacent probes is suppressed by maintaining minimum center-to-center spacing per Bently Nevada installation guidelines and verifying shielded cable integrity.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eQ:\u003c\/strong\u003e Can this 1.2 in case length probe replace a 330101 with 1.0 in case length in the same mounting hole?\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e Yes, provided the machined bore depth accommodates the additional 0.2 in case length. Verify that the unthreaded length option (0.0 in) matches the application requirement to avoid probe tip bottoming out on the shaft.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ:\u003c\/strong\u003e Is the probe polarity-sensitive when connecting to the driver module?\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e No. The miniature coaxial ClickLoc connector enforces correct pinout. Mating must be done with the 3300 XL driver module only to preserve calibrated scaling.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ:\u003c\/strong\u003e Does the absence of armor affect EMI performance?\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA:\u003c\/strong\u003e Unarmored standard cable relies on proper shield termination at one end (driver side). Route separately from power and switching circuits to maintain signal-to-noise ratio.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003cp\u003eMount the probe perpendicular to the conductive target surface. Engage a minimum of 5 full threads of the 3\/8-24 UNF fitting into the machine housing. Terminate the coaxial shield drain wire at the driver module end only—leave the probe-end shield floating—to prevent ground loops. Measure gap voltage after final tightening and confirm it falls near -10 VDC before placing machinery in service. Do not exceed the specified minimum bend radius of 25 mm for the coaxial cable.\u003c\/p\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":44266177232984,"sku":"330101-00-12-10-02-00","price":100.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0670\/2039\/0488\/files\/330101-00-12-10-02-00-3.jpg?v=1782113277","url":"https:\/\/www.industriaxplc.com\/id\/products\/bently-nevada-330101-00-12-10-02-00-3300-xl-8-mm-proximity-probe","provider":"IndustriaX Limited","version":"1.0","type":"link"}