{"product_id":"abb-spieet800-interface-communication-module","title":"ABB SPIEET800 Interface \/ Communication Module","description":"\u003ch2\u003eABB SPIEET800 Interface \/ Communication Module\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eABB SPIEET800\u003c\/strong\u003e, also cataloged as the \u003cstrong\u003eSPIEET800\u003c\/strong\u003e Interface \/ Communication Module, provides physical and data communication interfacing within compatible ABB industrial control system architectures. The supplied data identifies Industrial Ethernet, PROFIBUS, PROFINET, and Modbus as possible communication interfaces, depending on system configuration.\u003c\/p\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eParameter\u003c\/th\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eABB SPIEET800\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eABB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\u003ctd\u003eInterface \/ Communication Module\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSeries\u003c\/td\u003e\n\u003ctd\u003eSystem 800xA or compatible industrial control lines\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003e-40 deg C to +70 deg C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStorage Temp\u003c\/td\u003e\n\u003ctd\u003e-40 deg C to +85 deg C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRelative Humidity\u003c\/td\u003e\n\u003ctd\u003e5% to 95%, non-condensing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Voltage\u003c\/td\u003e\n\u003ctd\u003e24 VDC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003eNot specified in the provided data\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCommunication Protocols\u003c\/td\u003e\n\u003ctd\u003eIndustrial Ethernet, PROFIBUS, PROFINET, or Modbus, depending on system configuration\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eData Transmission Rate\u003c\/td\u003e\n\u003ctd\u003eUp to 100 Mbps \/ 1 Gbps, network dependent\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting\u003c\/td\u003e\n\u003ctd\u003eDIN rail mounting\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProtection Class\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiagnostics\u003c\/td\u003e\n\u003ctd\u003eLED indicators for power, status, and network activity\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCertifications\u003c\/td\u003e\n\u003ctd\u003eCE, UL, RoHS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eABB Industrial Communication Characteristics\u003c\/h3\u003e\n\u003cp\u003eThe SPIEET800 data identifies multiple industrial communication interfaces rather than one fixed protocol configuration. Therefore, the actual protocol set must match the installed system configuration and associated network hardware.\u003c\/p\u003e\n\u003cp\u003eFor ABB control architectures, backplane or system-bus communication can determine how interface hardware exchanges data with the controller and I\/O infrastructure. However, the supplied information does not specify the SPIEET800 backplane interface, electrical bus characteristics, or connector pin assignment.\u003c\/p\u003e\n\u003cp\u003eNetwork performance also depends on the installed communication infrastructure. The supplied specification states a transmission rate of up to 100 Mbps or 1 Gbps, depending on the network. Therefore, users should verify the configured network interface before selecting the associated cabling and network equipment.\u003c\/p\u003e\n\u003cp\u003eFirmware compatibility should likewise be confirmed against the target ABB control-system configuration. The provided data does not identify a specific firmware revision, bootloader version, or supported upgrade procedure.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eQ: What operating voltage does the ABB SPIEET800 require?\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eA:\u003c\/strong\u003e The supplied specification identifies a 24 VDC industrial supply. The exact current consumption is not specified.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Does the SPIEET800 support PROFINET, PROFIBUS, Industrial Ethernet, and Modbus simultaneously?\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eA:\u003c\/strong\u003e The supplied data lists these protocols as possible interfaces depending on system configuration. It does not confirm simultaneous operation of all protocols.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: What are the specified environmental limits?\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eA:\u003c\/strong\u003e The stated operating temperature is -40 deg C to +70 deg C, while storage temperature is -40 deg C to +85 deg C. Relative humidity is 5% to 95%, non-condensing.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eInstall the module on a compatible DIN rail and secure the mechanical mounting before connecting field wiring.\u003c\/li\u003e\n\u003cli\u003eConfirm the 24 VDC supply polarity and electrical compatibility before energizing the module.\u003c\/li\u003e\n\u003cli\u003eRoute communication cables separately from high-voltage power conductors where practical to reduce electromagnetic interference.\u003c\/li\u003e\n\u003cli\u003eUse the cable type and connector arrangement specified by the actual ABB system configuration.\u003c\/li\u003e\n\u003cli\u003eVerify shield termination and grounding practices against the applicable ABB system installation documentation.\u003c\/li\u003e\n\u003cli\u003eCheck network addressing and protocol configuration before placing the module into operational service.\u003c\/li\u003e\n\u003cli\u003eInspect the power, status, and network LEDs after energization and compare their indications with the system diagnostic documentation.\u003c\/li\u003e\n\u003cli\u003eDo not assume that all listed communication protocols are available on one hardware configuration; verify the installed system variant first.\u003c\/li\u003e\n\u003cli\u003eConfirm operating temperature, humidity, enclosure, and IP20 installation requirements at the installation location.\u003c\/li\u003e\n\u003cli\u003eBefore firmware modification, verify compatibility between the module firmware and the target control-system configuration.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"ABB","offers":[{"title":"Default Title","offer_id":44595683786840,"sku":"SPIEET800","price":99.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0670\/2039\/0488\/files\/SPIEET800-2_1200x1200_750ee6a9-c83e-4f97-8787-abb744159c4d.jpg?v=1786702028","url":"https:\/\/www.industriaxplc.com\/id\/products\/abb-spieet800-interface-communication-module","provider":"IndustriaX Limited","version":"1.0","type":"link"}