{"product_id":"9200-09-01-01-00-velocity-seismoprobe-transducer-bently-nevada","title":"9200-09-01-01-00 Velocity Seismoprobe Transducer | Bently Nevada","description":"\u003ch2\u003eBently Nevada 9200-09-01-01-00 Velocity Seismoprobe Transducer\u003c\/h2\u003e\n\u003cp\u003eConfigured for measurement of absolute velocity vibration at bearing housing and structural mounting points in rotating machinery vibration monitoring loop,the \u003cstrong\u003eBently Nevada 9200-09-01-01-00\u003c\/strong\u003e (\u003cstrong\u003e9200\u003c\/strong\u003e Velocity Seismoprobe Transducer) provides direct physical\/electrical execution.\u003c\/p\u003e\n\u003ch3\u003eSuffix Breakdown \u0026amp; Model Matrix\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e9200: Two-wire velocity Seismoprobe transducer platform\u003c\/li\u003e\n\u003cli\u003e09: Minimum operating frequency and mounting orientation configuration (15 Hz cutoff, omnidirectional mounting angle)\u003c\/li\u003e\n\u003cli\u003e01: Top-mounted electrical connector configuration (no integral cable)\u003c\/li\u003e\n\u003cli\u003e01: Circular base with 1\/4 in-20 UNC stud mounting interface\u003c\/li\u003e\n\u003cli\u003e00: Standard configuration without agency certification requirements\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eParameter\u003c\/th\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModelBrand\u003c\/td\u003e\n\u003ctd\u003eBently Nevada 9200-09-01-01-00\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eUSA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e~300 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003eHeight 102 mm, Diameter 41 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperatingTemp\u003c\/td\u003e\n\u003ctd\u003e-29 degC to +121 degC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePowerConsumption\u003c\/td\u003e\n\u003ctd\u003ePassive self-generating velocity transducer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSensitivity\u003c\/td\u003e\n\u003ctd\u003e20 mV\/mm\/s (500 mV\/in\/s) +\/- 5% at 22 degC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFrequencyResponse\u003c\/td\u003e\n\u003ctd\u003e15 Hz to 1000 Hz (-3 dB typical)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVelocityRange\u003c\/td\u003e\n\u003ctd\u003eUp to 25 mm\/s peak\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCoilResistance\u003c\/td\u003e\n\u003ctd\u003e1.25 kOhm +\/- 5%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTransverseSensitivity\u003c\/td\u003e\n\u003ctd\u003e\u0026lt;10% of axial sensitivity\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eRotordynamics Signal Integrity and Cross-Talk Suppression Behavior\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eBently Nevada 9200-09-01-01-00\u003c\/strong\u003e operates as a velocity-based electrodynamic pickup element, generating a proportional voltage output through relative coil motion within a magnetic field. In rotating machinery monitoring chains, the device output is directly influenced by \u003cstrong\u003erotordynamics excitation modes\u003c\/strong\u003e, including shaft imbalance and structural resonance coupling.\u003c\/p\u003e\n\u003cp\u003eCross-axis mechanical coupling is limited through internal suspension geometry, maintaining transverse sensitivity below 10% at 100 Hz. Signal scaling behavior is independent of external excitation power, and output stability is governed by coil velocity response rather than displacement amplitude. This eliminates dependency on external excitation circuits typical of eddy-current probe scaling systems and avoids gap-voltage validation mechanisms such as -10 VDC reference loops used in proximity probe systems.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eQ1: Is the output signal active or externally powered?\u003c\/strong\u003e\u003cbr\u003eA1: The transducer is passive. Output voltage is generated by coil motion within a magnetic field and does not require excitation power.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ2: Can the unit be connected directly to a high-impedance input?\u003c\/strong\u003e\u003cbr\u003eA2: Yes. Recommended load is 10 kOhm or higher to maintain calibrated sensitivity response and prevent amplitude attenuation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ3: What limits the low-frequency response boundary?\u003c\/strong\u003e\u003cbr\u003eA3: The low-frequency cutoff is defined by mechanical suspension characteristics and the 15 Hz configuration option (09 suffix), not by electronic filtering.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003cp\u003eMount the transducer rigidly using the 1\/4 in-20 UNC stud interface on a machined surface with verified flatness. Ensure full thread engagement of at least 5 turns minimum to prevent mechanical loosening under vibration load.\u003c\/p\u003e\n\u003cp\u003eRoute signal wiring using shielded twisted pair conductors. The shield should be grounded at a single acquisition system end only to prevent ground loop current injection.\u003c\/p\u003e\n\u003cp\u003eAvoid routing signal lines parallel to high-current switching conductors or VFD output cables to minimize induced noise coupling.\u003c\/p\u003e\n\u003cp\u003eInstall orientation according to expected vibration vector direction; although omnidirectional mounting is supported, axial alignment improves signal fidelity for dominant vibration modes.\u003c\/p\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":44275398475864,"sku":"9200-09-01-01-00","price":100.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0670\/2039\/0488\/files\/9200-09-01-01-00-3.jpg?v=1782372527","url":"https:\/\/www.industriaxplc.com\/id\/products\/9200-09-01-01-00-velocity-seismoprobe-transducer-bently-nevada","provider":"IndustriaX Limited","version":"1.0","type":"link"}